2 PDF Courses



Please, Read the following Paragraphs before Downloading


  • You can download the PDF Course by just click on its name. after downloading, you will need to enter your password again to open the file.

  • To get your password, you must be a member and to be a member you must register by click on the phrase " Join this site" in left bottom side of the home page, above the images of our members.

  • after finishing your registration  send email to ali1973hassan@yahoo.com, asking for your password and I will send it with email reply.




Note: New Courses will be added later and some Courses will be updated regularly. So, please keep following.



Course Code
Course Name
Transformers
TR-1
Inspect De-energized Transformers
TR-2
Inspection of power Transformers
Switchgear
SWG-1
Inspection of High Voltage Equipment ( Circuit Breakers and Disconnect Switches)
SWG-2
Inspection of Automatic Voltage Regulators AVR
SWG-3
Inspection of Load Banks
SWG-4
Inspection of Protection Relays
SWG-5
Inspect De-energized MCC
SWG-6
Inspect De-energized Magnetic Air Circuit Breaker
SWG-7
Inspect De-energized Oil Load Break Switch
SWG-8
Inspect De-energized SF6 Load Break Switch.
SWG-9
Inspect Battery Room
SWG-10
Inspect Motor, Gas or  Air Operated Valves
SWG-11
Inspect De-energized Light / Distribution Panel
SWG-12
Inspect De-energized Fused Disconnect
Generators and Motors
GEN-1
Inspection of Generators
MR-1
Inspection of Motors
Grounding and Lightning
GR-1
Inspect Ground Grids, Rods and Fence Grounds
LGN-1
Lightning Protection and Floating Roof Shunts
GR-2
Inspect LV Service Entrance Grounds
GR-3
Inspect Impedance Grounding
Conductors and Cables
CAB-1
Inspect Conductors
Wiring Methods
WR-1
Inspection of Facility
WR-2
Inspect Conduit, J Boxes, Pull Boxes
WR-3
Maintain Records
WR-4
Inspect Gutters and Wireways
WR-5
Inspect Cable and Cable Trays
WR-6
Inspect Duct Banks
WR-7
Inspect Cable Splices - Terminations
WR-8
Inspect Temporary Wiring
WR-9
Inspect Portable & Pendant Cord / Cable
WR-10
Inspect Cable Pulling Operations
Lighting
LG-1
Inspect Fluorescent / Incandescent Light Fixture
LG-2
Inspect Emergency Light Fixture
LG-3
Inspect Area / SSD Lighting
Standards and Codes
ST-1
Electrical Area Classification
ST-2
Verify Lockouts and Hold Tags
ST-3
Inspect Personal Protective Equipment.
ST-4
Inspect Seal Pouring in a Class I Area
Electrical Drawings
ED-1
Interpret Basic Electrical Drawings
ED-2
Draw/Modify Electrical Drawings
Reporting
RP-1
Inspect Work Permit Jobsite Conditions
RP-2
Make Oral Reports
RP-3
Write Inspection Reports - Operation
RP-4
Write Inspection Reports - Projects










2 comments:

  1. Dear this is very good effort to share knowledge to persons who want to improve there skills

    ReplyDelete
  2. Sir,
    I can’t find any link to the download the course

    ReplyDelete